Biodiesel Heaters and its Overall Effect

With today’s society leaning towards environmental awareness, even biodiesel heaters are used in homes.

These are boiler or furnaces that provide home heating powered by diesel or No. 2 oil. Biodiesel has also become as an alternative energy source for boilers or oil-fired furnaces.

If biodiesel is used as a heating fuel, it is referred to as bioheat or biofuel. The conventional fuel, which is popularly used as heating oil, takes a million years to create.

However, biodiesel can be produced in just a couple of months or even shorter. Aside from its availability, environmental benefits are offered by using a biodiesel heater.

When using biodiesel home heating oil to give warmth to your home, it is necessary to check the burner bump seal. This is done to know assure the quality of the rubber and its ability to resist damage.

Setting up biodiesel heaters and using biodiesel as fuel can undoubtedly save a substantial amount of crude oil. Based on the estimations gathered by the officers of the USDA Agricultural Research located in Beltsville, Maryland, if everyone living in the Northeast use B5 blend fuels in their furnaces, more than 50 million gallons of regular heating oil could be saved.

The emissions of biodiesel home heaters diminish the pollution significantly than diesel fuel. Using these will cut the particulate and hydrocarbon emissions in half. It also reduces the nitrogen oxide and carbon monoxide emissions.

Using the biodiesel fuel is also certified by EPA. Using B20 fuels can restrict the emissions by approximately 20 percent. If biofuel blends are below B30, no one can notice the changes in its performance therefore, you can use the same furnace for biodiesel home heating systems.

Of all the heating oil users, seventy-five percent are located at the Northeast region. This means that if we want to propagate the usage of biodiesel heating, we have to start at the Northeast. However, if it is feasible, can the supply for biodiesel meet its demands? According to Energy Information Agency, homeowners in the United States use 6.6 billion gallons of No.2 heating oils in 2001. If everyone uses B20 for their furnaces, we would need 1.3billion gallons of biodiesel. Based on the data gathered in 2008, biodiesel production can reach up to 2.2 billion gallons per year.

Before you opt to use biodiesel heaters, you have prepare few simple tasks which can unsure a trouble-free and safe transition. You must make sure that your boiler or furnace is clean. The furnace’s oil filter should be replaced.

If you have an old tank, it is advised that you have an extra oil filter. Even though B20 is assumed to be harmless when used, it is recommended to use B5 blends first. As months pass, you can increase the concentration.

Using biodiesel for home heaters can have its pros and cons. Biodiesel is biodegradable and has low toxicity levels. It reduces the cleaning intervals of boilers and furnaces. You don’t need to replace your heating tank and will burn in almost any oil-fired boiler or furnace. However, biodiesel can clog fuel filters when used in older systems.